YUHONG GROUP CO.,LIMITED

Heat Exchanger U Bend Tube SA213 TP304L TP304H,Seamless U Tube ASME SA213 TP304,U Bend Tube ASME SA213 TP304H For Heat Exchanger

86-574-88013900

Home > Products > Heat Exchange Tube > U Bend Heat Exchanger Tube > Heat Exchanger U Bend Tube SA213 TP304L TP304H
Product Categories
Online Service

Heat Exchanger U Bend Tube SA213 TP304L TP304H

Basic Info

Model No.U Bend Tube ASME SA213 TP304

BrandYUHONG

Additional Info

PackagingPly-wooden Case /Iron Case Packing, each radius separated

Productivity1500 Tons per month

TransportationOcean,Land,Air

Place of OriginCHINA

CertificateDNV, BV, PED, LR, ABS, TS, CCS

Payment TypeT/T,L/C,Western Union

Product Description

Detailed Product Description

Stainless Steel U Bend Tube ASME SA268, ASME SA213 TP304 / TP304L / TP304H / TP304N


YUHONG GROUP deal with Austenitic Stainless Steel, Nickel Alloy Steel (Hastelloy, Monel, Inconel, Incoloy ) seamless and welded pipe and tube already more than 25 years, every year sell more than 80000 tons of steel pipe and tube. Our client already cover more than 45 countries, Like Italy, UK, Gernmany, USA, Canada, Chile, Colombia, Saudi Arabia, Russia, Korea, Singapore, Austrial, Poland, France , ....And our group branch company and factory have been already approved by : ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2008, ISO 14001-2004.


Features :

  • 'U' bending is done by cold working process.
  • 'U' bending is done to the required radius as per customer drawings.
  • The bend portion and six inch leg is stress relieved by resistance heating.
  • Inert gas (Argon) is passed through it at the required flow rate to avoid oxidation in ID.
  • The radius is checked for its OD and wall thinning with the recommended specification.
  • The physical properties and micro-structure is checked at three different position.
  • Visual inspection for waviness and cracks is done with Dye Penetrant Test.
  • Each tube is then hydro tested at the recommended pressure to check for leakage.
  • Cotton ball test is done to check the ID cleanliness of the tube.
  • Thereafter pickled, dried, marked and packed.
  • All procedure is strictly followed as per TEMA "C" and ASTM A-688.


U-Bend Tube are widely used in Heat Exchanger Systems. Heat-Exchanger Equipment on the basis of
Seamless Stainless U-Tubes and Welded Stainless U bend Tube is essential in strategically important and
critical felds---Nuclear And Petrochemical Machine Building.
YUHONG SPECIAL STEEL Start to Produce U Bending Tube Since 2006,Up to now already supply more than
30000 tons Stainless Steel U bend Tube to 35 countries.


The U-Bend Tube Comply With The Following Standards:
1. ASTM A688/ASME SA688
2. ASTM A803/ASME SA803
3. ASTM A556/ASME SA556

Steel Grade:

Ferrite

Austenite

Duplex

Super Duplex

Ni-Alloys

Titanium

TP410
TP405
S44400
S44660
TP430

TP304/304L
TP316/316L
TP316Ti
TP317/317L
TP321
TP347

S31803
S32205
S32304

S32750
S32760

N06600
N08020
N00880
N08825
N08904

Gr.2











Tube Of Other Alloys And Steel Grades Can Be Produced Upon Agreement.

Technical Requirements:
Straight Tubes Standard Specification For Bending:
ASME SA 213; ASME SB 163; ASME A789, ASME SA268, ASME SA269, etc.
Marking: Before Bending By Marking Machine All Over The Tube Length (Bent Section After Heat
Treatment Without Marking)
Note: Marking is also possible After Bending On The Straight Parts Of U-Bending Tube.

U-Bend Tubes:
-TEMA RCB 2.31 Standard Of The Tubular Exchanger Manufacturers Association (9th Edition).
-ASTM A688/ASME SA688 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant
Steel Grade Designed For Feed Water Boilers.
-ASTM B163/ASME SA163 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For
Condensers And Heat Exchangers.
-Customer Specifications.


Stainless Steel U Bend Tube ASME SA249 ,A688, ASME SA213 TP304 / TP304L / TP304H / TP304N

Bending Radius: From 1.5*OD(Outside Diameter) To 1500mm
When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.
Straight Tubes Maximum Length:(Before Bending): 35000 mm.
Leg Length: Min 1 Meter, Max. 16500 mm (For Max R=1500mm)
Note: Other Size Are Available Upon Agreement.
Heat Treatment: Stress Relieved After U-Bending (Bending Area Plus 300MM For Each Leg).
Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With
Dematerialized Water. Compressed Air Cleaning After Hydro-Test.
Packaging: In Strong Transport-Worthy Pre-fumigated wooden boxes of corresponding dimensions for
each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.

U Bend Tube ASME SA213 TP304 TP304H For Heat Exchanger

U Bend Tube ASME SA213 TP304 TP304L TP304H For Heat Exchanger

Product Categories : Heat Exchange Tube > U Bend Heat Exchanger Tube

Product Images

  • Heat Exchanger U Bend Tube SA213 TP304L TP304H
  • Heat Exchanger U Bend Tube SA213 TP304L TP304H
  • Heat Exchanger U Bend Tube SA213 TP304L TP304H
  • Heat Exchanger U Bend Tube SA213 TP304L TP304H
  • Heat Exchanger U Bend Tube SA213 TP304L TP304H
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters