Model No.: U Bend Tube
Application: Boiler Pipe
Section Shape: Round
Usage: Thermal Equipment
Technique: Cold Drawn
Material: Stainless Steel
Packaging: Plywood Case Packing
Productivity: 800 Tons Per Month
Place of Origin: CHINA
Certificate: ISO9001-2008, PED, BV, DNV, ABS, NK, KR, LR
Stainless Steel U Bend Tube , ASTM A213 TP304/304L , TP316/316L , TP321/321H , TP310/310S
U Bend Tube of stainless steel, Duplex Steel, Alloy Steel. 100% Hydro Test, Eddy Current Test . Ultraulic Test .
Stainless Steel U bend Tube DIN 17458 EN 10216-5 , EN 10204-3.1B 1.4301, 1.4304, 1.4401, 1.4541.
U-Bend Tube are widely used in Heat Exchanger Systems. Heat-Exchanger Equipment on the basis of
Seamless Stainless U-Tubes and Welded Stainless U bend Tube is essential in strategically important and
critical felds---Nuclear And Petrochemical Machine Building.
YUHONG Group Start to Produce U Bending Tube Since 2006,Up to now already supply more than
30000 tons Stainless Steel U Bend Tube to 35 countries.
The U-Bend Tube Comply With The Following Standards:
1. ASTM A688/ASME SA688
2. ASTM A803/ASME SA803
3. ASTM A556/ASME SA556
Tube Of Other Alloys And Steel Grades Can Be Produced Upon Agreement.
Straight Tubes Standard Specification For Bending:
ASME SA 213; ASME SB 163; ASME A789, ASME SA268, ASME SA269, etc.
Marking: Before Bending By Marking Machine All Over The Tube Length (Bent Section After Heat
Treatment Without Marking)
Note: Marking is also possible After Bending On The Straight Parts Of U-Bending Tube.
-TEMA RCB 2.31 Standard Of The Tubular Exchanger Manufacturers Association (9th Edition).
-ASTM A688/ASME SA688 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant
Steel Grade Designed For Feed Water Boilers.
-ASTM B163/ASME SA163 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For
Condensers And Heat Exchangers.
Bending Radius: From 1.5*OD(Outside Diameter) To 1500mm
When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.
Straight Tubes Maximum Length:(Before Bending): 35000 mm.
Leg Length: Min 1 Meter, Max. 16500 mm (For Max R=1500mm)
Note: Other Size Are Available Upon Agreement.
Heat Treatment: Stress Relieved After U-Bending (Bending Area Plus 300MM For Each Leg).
Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With
Dematerialized Water. Compressed Air Cleaning After Hydro-Test.
Packaging: In Strong Transport-Worthy Pre-fumigated wooden boxes of corresponding dimensions for
each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.Looking for ideal Stainless Steel U Bend Tube ASTM A213 TP321H For Heat Exchanger Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the U Bend Tube A213 TP321H For Boiler are quality guaranteed. We are China Origin Factory of A213 TP321H 1.4541 U Bend Tube For Heat Exchanger. If you have any question, please feel free to contact us.