YUHONG GROUP CO.,LIMITED

Copper Nickel Pipes and Tubes ASTM B111 C70600,ASTM B111 C70600 Cupro Nickel Pipes and Tubes,Cupro Nickel Tubes CU-NI 90/10

86-574-88013900

Home > Products > Heat Exchange Tube > Copper Nickel Alloy Tube > Copper Nickel Pipes and Tubes ASTM B111 C70600
Product Categories
Online Service

Copper Nickel Pipes and Tubes ASTM B111 C70600

Basic Info

Model No.Copper Nickel Pipes and Tubes ASTM B111 C70600

BrandYUHONG

Additional Info

PackagingSTRONG PLYWOOD CASE WITH STEEL FRAME

Productivity500 Tons Per Month

TransportationOcean,Land,Air

Place of OriginCHINA

CertificateASTM B111 ASTM B28

Payment TypeL/C,T/T,Western Union

Product Description

Detailed Product Description


Copper Nickel Pipes and Tubes | Cupro Nickel Pipes and Tubes
Cupro Nickel Tubes 90/10
This form of cupro nickel tubes produced by Tube Tech possess excellent resistance to corrosion by sea water as well as high resistance to erosion corrosion and air-impingement attack. The addition of iron results in 90/10 performing as good as 70/30 in salt water service heat exchangers. These tubes have good strength and ductility at ordinary temperatures and relatively high strength and other mechanical properties at elevated temperatures.
These cupro nickel tubes are widely used in condensers, coolers and heat exchangers where resistance to corrosion and erosion is paramount, yet maintaining a high thermal conductivity rate. To be used preferably in marine conditions. Forms a protective film which is multi-layered in flowing seawater. Resists marine bifouling.
These cupro nickel tubes are produced in a range of outside diameter, wall thickness various temper conditions to achieve the required mechanical properties and grain size. The mechanical and dimensional characteristics of our products satisfy the most demanding orders that require tight tolerances.
Cupro Nickel Tubes 70/30
Prosaic Steel supplies smooth bore 70/30 cupro nickel tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These cupro nickel tubes have the highest resistance to stress-corrosion cracking. These tubes are available in a variety of outside diameter, wall thickness and tempers to meet the requirement. Superior dimensional control with specified mechanical properties offers trouble free performance and cost saving.

This form of cupro nickel tube gives the best service life under the most adverse conditions because of improved corrosion resistance and almost insensitive to stress corrosion. These cupro nickel tubes are used in heat exchangers where severe erosion and corrosion have been experienced, especially at elevated temperatures, high velocities and extreme turbulence of the circulating media. These cupro nickel tubes have an important bearing not only on the performance of heat exchangers but also on the cost and delivery cycle time of the condenser and heat exchangers where they are used.
Copper Nickel Pipes and Tubes , Cupro Nickel Pipes and Tubes ASTM B111 C70400 C70600,ASTM B288, ASTM B688 .


Standards

Cupro Nickel Tube90/ 10

Standard

BS2871part3

ASTM B-111

IS 1545

JIS H 3300

NFA 51 102

Symbol

CN 102

C 70600

CuNi10Fe1

C7060

CuNi10Fe1Mn

Cupro Nickel Tubes 70/30

Standard

BS2871part3

ASTM B-111

IS 1545

JIS H 3300

NFA 51 102

NFA 51 102

CN 107

C 71500

CuNi30Mn1Fe

C 7150

CuNi30Mn1Fe


Dimensional Range
Outer Diameter - 4.00 to 22.00 mm
Wall Thickness - Between 0.15mm and 1.50 mm
Length upto 6 mtrs
End Applications

Heat Exchangers, Oil Coolers, Radiators, High Capacity Power Plants, Ship Building & Ship Repairs, Condensers, Offshore Oil rigs, Distiller Tubes, Evaporators, Ferrules etc.

Cupro Nickel Tubes 90/10 for Heat Exchangers & Condensers

These Cupro Nickel tubes & pipes for Heat Exchangers & Condensers are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.
Cupro Nickel Tubes 90/10 for Automobile Industries

The Move To Copper-Nickel Tubing
Copper had been proved since the early days to have many good attributes. It was easy to bend and had very high corrosion resistance, but there was concern about its low corrosion-fatigue strength. When copper-nickel was introduced, it displayed corrosion resistance similar to copper, higher general strength and better fatigue strength. Good formability allows ease of flaring and bending, and although the metal cost is greater than that of steel alternatives, copper-nickel is very attractive in view of its extra life, trouble-free installation and safety/reliability characteristics.
Properties of Copper-Nickel Brake Tubing
The copper-nickel alloy used for brake tubing typically contains 10% nickel, with iron and manganese additions of 1.4% and 0.8% respectively. The product conforms to ASTM B466 (American Society for Testing and Materials), which specifies dimensions, tensile strength and yield strength. Formability and internal cleanliness conform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturers and Traders). Also, the alloy meets the requirements for pressure containment, fabrication and corrosion resistance for ISO 4038 (International Standards Organization) and SAE J1047.

Product Categories : Heat Exchange Tube > Copper Nickel Alloy Tube

Product Images

  • Copper Nickel Pipes and Tubes ASTM B111 C70600
  • Copper Nickel Pipes and Tubes ASTM B111 C70600
  • Copper Nickel Pipes and Tubes ASTM B111 C70600
  • Copper Nickel Pipes and Tubes ASTM B111 C70600
  • Copper Nickel Pipes and Tubes ASTM B111 C70600
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters