YUHONG GROUP CO.,LIMITED

Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H,Stainless Steel U Tube SA213 TP321 TP321H,ASME SA213 TP310 TP310S U Bend Heat Exchanger Tube

86-574-88013900

Home > Products > Stainless Steel Tube > Stainless Steel U bend Tube > Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger
Product Categories
Online Service

Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger

Basic Info

Model No.Stainless Steel U Bend Tube ASTM A213 TP321 321H

BrandYUHONG

Additional Info

PackagingPly-wooden Case /Iron Case Packing, each radius separated

Productivity1500 tons per month

TransportationOcean,Land,Air

Place of OriginCHINA

CertificateISO9001-2008, PED, BV, DNV, ABS, NK, KR, LR

Payment TypeT/T,L/C,Western Union

Product Description

Detailed Product Description

TP304L U Bend Tube: ASME SA213 , ASTM A213 TP304L U Bend Heat Exchanger Tube TP304 U Bend Tube: ASME SA213 , ASTM A213 TP304 U Bend Heat Exchanger Tube
TP304H U Bend Tube: ASME SA213 , ASTM A213 TP304H U Bend Heat Exchanger Tube TP304LN U Bend Tube: ASME SA213 , ASTM A213 TP304LN U Bend Heat Exchanger Tube
TP316L U Bend Tube: ASME SA213 , ASTM A213 TP316L U Bend Heat Exchanger Tube TP321 U Bend Tube: ASME SA213 , ASTM A213 TP321 U Bend Heat Exchanger Tube
TP310S U Bend Tube: ASME SA213 , ASTM A213 TP310S U Bend Heat Exchanger Tube

Stainless Steel U Bend Tube , ASTM A213 TP304/304L , TP316/316L , TP321/321H , TP310/310S U Bend Tube of stainless steel, Duplex Steel, Alloy Steel.

100% Hydro Test, Eddy Current Test . Ultraulic Test .

Stainless Steel U bend Tube DIN 17458 EN 10216-5 , EN 10204-3.1B 1.4301, 1.4304, 1.4401


U-Bend Tube are widely used in Heat Exchanger Systems. Heat-Exchanger Equipment on the basis of

Seamless Stainless U-Tubes and Welded Stainless U bend Tube is essential in strategically important and

critical felds---Nuclear And Petrochemical Machine Building.

YUHONG Group Start to Produce U Bending Tube Since 2006,Up to now already supply more than

30000 tons Stainless Steel U Bend Tube to 35 countries.

The U-Bend Tube Comply With The Following Standards:

1. ASTM A688/ASME SA688

2. ASTM A803/ASME SA803

3. ASTM A556/ASME SA556


Steel Grade:

Ferrite

Austenite

Duplex

Super Duplex

Ni-Alloys

Titanium

TP410

TP405

S44400

S44660

TP430

TP304/304L

TP316/316L

TP316Ti

TP317/317L

TP321

TP347

S31803

S32205

S32304

S32750

S32760

N06600

N08020

N00880

N08825

N08904

Gr.2









Tube Of Other Alloys And Steel Grades Can Be Produced Upon Agreement.


Technical Requirements:

Straight Tubes Standard Specification For Bending:

ASME SA 213; ASME SB 163; ASME A789, ASME SA268, ASME SA269, etc.

Marking: Before Bending By Marking Machine All Over The Tube Length (Bent Section After Heat Treatment Without Marking)

Note: Marking is also possible After Bending On The Straight Parts Of U-Bending Tube.


U-Bend Tubes:

-TEMA RCB 2.31 Standard Of The Tubular Exchanger Manufacturers Association (9th Edition).

-ASTM A688/ASME SA688 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant

Steel Grade Designed For Feed Water Boilers.

-ASTM B163/ASME SA163 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For

Condensers And Heat Exchangers.

-Customer Specifications.

Stainless Steel U Bend Tube , ASTM A213 TP304/304L , TP316/316L , TP321/321H , TP310/310S


Bending Radius: From 1.5*OD(Outside Diameter) To 1500mm

When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.

Straight Tubes Maximum Length:(Before Bending): 35000 mm.

Leg Length: Min 1 Meter, Max. 16500 mm (For Max R=1500mm)

Note: Other Size Are Available Upon Agreement.

Heat Treatment: Stress Relieved After U-Bending (Bending Area Plus 300MM For Each Leg).

Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With

Dematerialized Water. Compressed Air Cleaning After Hydro-Test.

Packaging: In Strong Transport-Worthy Pre-fumigated wooden boxes of corresponding dimensions for

each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene

films With soft plastic caps on both end of Tube.

Some of the quality tests carried out by us includes:

Corrosion Test Conducted only when specially requested by the client
Chemical Analysis Test done as per required quality standards
Destructive / Mechanical Testing Tensile | Hardness | Flattening | Flare | Flange
Reverse-bend and Re. flat tests Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end
Eddy Current Testing Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System
Hydrostatic Testing 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s .
Air Under Pressure Test To check any evidence of air leakage
Visual Inspection After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections

Supplementary Testing : Apart from the above mentioned tests, we also carry out on the manufactured products supplementary testing. The tests conducted under this include:

  • Eddy Current Testing
  • O.P Testing
  • Radiography Testing
  • Corrosion Testing
  • Micro Testing
  • Macro Testing
  • IGC Testing
  • Ultrasonic testing
  • Liquid Penetrate testing
ASME SA269 TP316L U Tube for condenser

Product Categories : Stainless Steel Tube > Stainless Steel U bend Tube

Product Images

  • Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger
  • Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger
  • Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger
  • Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger
  • Stainless Steel U Bend Tube ASTM A213 TP321 TP321H TP347 TP347H for Heat Exchanger
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters