YUHONG GROUP CO.,LIMITED

Butt Weld Fittings SB366 Inconel 600,Inconel 600 Fitting Elbow Tee Concentric Reducer,Alloy 600 Fitting

86-574-88013900

Home > Products > Steel Fitting > Inconel Fitting > Butt weld fittings SB366 Inconel 600
Product Categories
Online Service

Butt weld fittings SB366 Inconel 600

Basic Info

Model No.Butt weld fittings SB366 Inconel 600

BrandYUHONG

Additional Info

PackagingPlywood Case Packing

Productivity500 Tons Per Month

Place of OriginCHINA

CertificateABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008

Product Description

Detailed Product Description

Butt weld fittings SB366 Inconel 600, Inconel 601, Inconel 718, Inconel 625, Elbow,Tee, Reduce, Cap


Inconel® 600 is a nickel-base alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy has long been used in the heat treating industry for many of the same applications as RA330®. 600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic. However, when sulfur compounds are present as well, or for ammonium hydroxide service, 600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies. To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use. A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.

Chemistry

Ni Cr C Mn Cu Si S Fe
MIN 72.00 14.00 -- -- -- -- -- 6.00
MAX 17.00 0.15 1.00 0.50 0.50 0.015 10.00

*ASTM specification 0.20 max C.

Specifications

AMS 5540, AMS 5665
ASME SB 166, ASME SB 167, ASME SB 168
ASTM B 166, ASTM B 167, ASTM B 168
EN 2.4816
UNS N06600
Werkstoff 2.4816

Inventory

600 Plate, 600 Rod Coil, 600 Round Bar, 600 Sheet, 600 Welding Products

Common Trade Names

Alloy 600, Inconel® 600, Nickel 600

Features

· Virtually immune to chloride ion stress corrosion cracking

· Good caustic corrosion resistance

· Resistant to dry Cl2 to about 1000°F

· Oxidation resistance to 2000°F

· Carburization resistance

Applications

· Heat treating muffles and retorts

· Vacuum furnace fixtures

· Chlorination equipment to 1000°F

· Titanium dioxide plants

Physical Properties

Density: 0.304 lb/in3
Melting Point: 2470- 2575°F
Poisson's Ratio: 0.29
Electrical Resistivity: 620 Ohm-circ mil/ft

Temperature, °F 70 1000 1200 1400 1600 2000
Coefficient* of Thermal Expansion, in/in°F x 10-6 - 8.4 8.6 8.7 9.1 9.3
Thermal Conductivity
Btu • ft/ft2 • hr • °F
8.6 13.2 14.3 13.0 16.7 -
Modulus of Elasticity, Dynamic psi x 106 30.0 25.6 24.5 23.6 22.2 20.4

* 70°F to indicated temperature.

Mechanical Properties

Representative Tensile Properties

Temperature,°F 70 1000 1200 1400 1600 1800
Ultimate Tensile Strength, ksi 93 84 65 27.5 15 7.5
0.2% Yield Strength, ksi 37 28.5 26.5 17 9.0 4.0
Charpy Impact V-notch, ft-lbs 45 47 39 46 80 118

Static Corrosion in Molten Caustic Soda

Corrosion Rate, Mils Per Year

Temperature, °F 750 932 1076 1256
Alloy 201 0.9 1.3 2.5 37.8
Alloy 400 1.8 5.1 17.6 -
Alloy 600 1.1 2.4 5.1 66.4


Inconel Buttweld Fittings are available in different grades of the super alloy, as follows:
Grade UNS W.Nr. Trade Name
Inconel 600 N06600 2.4816 Inconel 600®, Nickelvac® 600, Ferrochronin® 600
Inconel 601 N06601 2.4851 Inconel 601®, Pyromet® 601, Nicrofer® 601
Inconel 617® N06617 2.4663 Inconel 617®, Nicrofer® 617
Inconel 625 N06625 2.4856 Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020
Inconel N07718 2.4668 Inconel 718®, Nicrofer® 5219, Alvac® 718, Haynes® 718, Altemp® 718
Inconel X 750 N07750 2.4669 Inconel X750®, Haynes X750®, Pyromet® X750, Nickelvac®X750, Nicorros® 7016
Incoloy 800 N08800 1.4876 Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220
Incoloy 800H N08810 1.4876 Incoloy 800H®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220
Incoloy 800HT N08811 1.4876 Incoloy 800HT®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220
Incoloy 825 N08825 2.4858 Incoloy 825®, Nickelvac® 825, Nicrofer 4241®


Types:Elbow - 90 Deg. & 45 Deg., Tee - Equal & Reducing, Union, Cross, Coupling - Full & Half, Socket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipolet.

Product Categories : Steel Fitting > Inconel Fitting

Product Images

  • Butt weld fittings SB366 Inconel 600
  • Butt weld fittings SB366 Inconel 600
  • Butt weld fittings SB366 Inconel 600
  • Butt weld fittings SB366 Inconel 600
  • Butt weld fittings SB366 Inconel 600
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters