YUHONG GROUP CO.,LIMITED

Home > Recommended
Product Categories
Online Service

Wholesale Discount for Inconel Steel Tube Alloy 600 UNS N06600 Inconel 600 Tubing export to Tuvalu Exporter

  • Product Detail
  • Product Tags
  • Buyer Reviews

It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking for Alloy 600 UNS N06600 Inconel 600 Tubing Nonmagnetic High Temper,Inconel 600 ASME SB167 Seamless Tubing,Alloy 600 ASME SB516 Tube. and established long term and cooperative relationship with them. We`ll provide the best service for every customer and sincerely welcome friends to work with us and establish the mutual benefit together.

Wholesale Discount for Inconel Steel Tube Alloy 600 UNS N06600 Inconel 600 Tubing export to Tuvalu Exporter

Detailed Product Description
Standard: B167, B163, B516, B517 Grade: Inconel600, NO6600, 2.4816
Size: OD:3MM TO 530MM ,WT:0.2MM TO 60MM, L:MAX 50M PACKING: Ply-wooden Case Or Iron Case

Alloy 600 UNS N06600 Inconel 600® Tubing Nonmagnetic High Temperature


Description

Alloy 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.

This alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.

Corrosion Resistance

The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

Heat Treatment

Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.


Workability

Hot Working/Forging
Low sulfur reducing furnace atmospheres should be used in forging. Major hot working should be done between 2300/1850°F, while light working may be continued as low as 1600°F. No hot working should be attempted between 1600/1200°F due to lower ductility in that range.

Machinability
Alloy 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp.
Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s). (This data should be used as a guide for initial machine setup only. The figures used are averages. On certain work, the nature of the part may require adjustment of speeds and feeds.)
Sulfur-based oil should be used as a lubricant, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.

Cold Working
For higher properties, alloy 600 can be cold worked below 1200°F (649°C).

Welding
Alloy 600 can be joined by the usual welding , brazing, and soldering process.


Typical Mechanical Properties

Typical Mechanical Properties
Various forms and conditions

Form
and
Condition

Tensile Strength

0.2%
Yield Strength

% Elongation
in 2"

%
Reduction
of Area

Rockwell
Hardness

Rod and Bar
Cold-drawn
Annealed
As-drawn
Hot rolled
Annealed
As-rolled
Hot-finished
Strip
Annealed


80-100
105-150
80-100
85-120
80-120
80-100


552-689
724-1034
552-689
586-827
586-827
552-689


25-50
80-125
30-50
35-90
35-90
30-45


172-345
552-862
207-345
241-621
241-621
207-310


55-35
30-10
55-35
50-30
50-30
55-35


70-60
60-30
70-60
65-50
65-50
----


65-85B
90B-30C
65-85B
75-95B
75-95B
84B max.

Average Room Temperature Tensile Data

Form

Condition

Ultimate Tensile Strength,
Ksi (MPa)

Yield Strength at 0.2% offset,
Ksi (MPa)

Elongation in 2 in. (50.8mm)
or 4D, percent

Sheet
Plate
Bar/Billet
Sheet, Plate, Strip, Bar

Annealed
Annealed
Annealed
Annealed

98 (676)
95 (655)
95 (655)
80 (550)*

42 (290)
41 (283)
41 (283)
35 (240)*

40
45
45
30*

* - minimum



Sheet/Plate Round Bar Pipe Tube Fittings Forgings
ASME SB-168 AMS 5540 ASME SB-166 AMS 5665 ASME SB-167 ASME SB-829 ASME SB-517 ASME SB-775 ASME SB-163 ASME SB-516 ASME SB751 AMS 5580 ASME SB-366 ASME SB-564 AMS 5665


Applications

Some typical applications are:

  • Barge and tank truck liners
  • Carburizing atmospheres
  • Ethylene dichloride crackers
  • Furnace trays, mufflers, hangers
  • Gasoline stabilizer production
  • MgCl2 evaporates
  • Phenol condensers
  • Soap manufacture
  • Titanium dioxide
  • Vegetable and fatty acid vessels

"Our goal is usually to deliver high quality items at aggressive price ranges, and top-notch service to shoppers around the entire world. We're ISO9001, CE, and GS certified and strictly adhere to their high quality specifications for Alloy 600 UNS N06600 Inconel 600 Tubing. The product will supply to all over the world, such as: South Africa,Indonesia,Georgia. We supply professional service prompt reply timely delivery excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this our products and solutions are sold very well in the countries in Africa the Mid-East and Southeast Asia.

Email To This Supplier

Your message must be between 20-8000 characters

YOU MAY LIKE
  • Ni-Cr-Fe Base Alloy, Uns N06600 (Inconel 600)

    Model NO NS312 Technique Customize Standard AISI ASTM DIN JIS GB

    Ask PriceClick for details

  • Inconel 600 Nickel Alloy Material for Electric Heating Tube UNS N06600

    Model NO inconel 600 Standard JIS GB DIN BS ASTM AISI Alloy

    Ask PriceClick for details

  • Inconel 600 rod bar UNS N06600 DIN W. Nr. 2.4816

    Model NO Inconel 600 Material Ni Cr Fe surface bright or

    Ask PriceClick for details

  • High Quality Nicked Base Alloy 600 Elbow Made in China

    Model NO Nicked Base Alloy 600 Shape Equal Angle 90

    Ask PriceClick for details

  • Uns No6600 ASTM B167 Nickel Alloy 600 Round Bar

    Model NO Alloy 600 Standard JIS GB DIN BS ASTM AISI Alloy

    Ask PriceClick for details

  • Nickel Alloy UNS N06600/NS 312 Inconel 600

    Model NO Inconel 600 Standard JIS GB DIN BS ASTM AISI Alloy Alloy Powder Not Powder Product Shape plate pipe bar sheet wire strip Mode of Transport International Express By Air By Sea OEM Yes Melting Range 1370 1425 Grade Inconel 600 UNS N06600 NS 312 Transport Package wooden case Origin Shanghai China Application

    Ask PriceClick for details