YUHONG GROUP CO.,LIMITED

86-574-88013900

Home > Recommended
Product Categories
Online Service

Leading Manufacturer for Stainless Steel Bright Annealed Tube Stainless Steel Bright Annealed Tube ASTM A249 TP304 export to Afghanistan Exporter

  • Product Detail
  • Product Tags
  • Buyer Reviews

We believe in: Innovation is our soul and spirit. Top quality is our life. Consumer will need is our God for Stainless Steel Bright Annealed Tube ASTM A249 TP304,Bright Annealed Tube ASME SA249 TP304,BA Welded Tubing A249 TP304. the trust is getting there. Our business always at your services at any time.

Leading Manufacturer for Stainless Steel Bright Annealed Tube Stainless Steel Bright Annealed Tube ASTM A249 TP304 export to Afghanistan Exporter

Bright Annealed Welding Tube A249 TP304 Yuhong Holding Group Qualified supplier in China

Detailed Product Description

ASME SA249 / ASTM A249 Stainless Steel Welded Tubing, Bright annealed , Plain End , TP304, TP304L, TP316, TP316L, TP316H, TP316Ti


A 249 / SA 249: Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes


1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1, with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes.
1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TO310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service such as for superheaters and reheaters.
1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.320 in. [0.4 to 8.1 mm], inclusive, in wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.
1.4 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.
1.5 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. (A combination of values from the two systems may result in nonconformance with the specification.) The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.


Chemical Composition:

Elements

304L(wt%)

316L (wt%)


(C) Carbon, max

0.035

0.035

(Mn) Manganese, max

2.00

2.00

(P) Phosphorus, max

0.040

0.040

(S) Sulfur, max

0.030

0.030

(Si) Silicon, max

0.75

0.75

(Ni) Nickel

8.0 - 13.0

10.0 - 15.0

(Cr) Chromium

18.0 - 20.0

16.0 - 18.0

(Mo) Molybdenum

N/A

2.0 - 3.0

(Fe) Iron

Bal.

Bal.

(Cu) Copper

N/A

N/A

(N) Nitrogen

N/A

N/A


Dimensional Tolerences

All dimensions in inches (mm)

Size OD

Nominal Wall

Outside Diameter

Length

Wall

1/2" (12.7)

0.065" (1.65)/0.049" (1.25)

+/-0.005 (0.13)

+1/8" (3.18) - 0

+/-10.0%

3/4" (19.1)

0.065" (1.65)/0.049" (1.25)

+/-0.005 (0.13)

+1/8" (3.18) - 0

+/-10.0%

1" (25.4)

0.065" (1.65)/0.049" (1.25)

+/-0.005 (0.13)

+1/8" (3.18) - 0

+/-10.0%

1-1/2" (38.1)

0.065" (1.65)/0.049" (1.25)

+/-0.008" (0.20)

+1/8" (3.18) - 0

+/-10.0%

2" (50.8)

0.065" (1.65)/0.049" (1.25)

+/-0.008" (0.20)

+1/8" (3.18) - 0

+/-10.0%

2-1/2" (63.5)

0.065" (1.65)

+/-0.010" (0.25)

+1/8" (3.18) - 0

+/-10.0%

3" (76.2)

0.065" (1.65)

+/-0.010" (0.25)

+1/8" (3.18) - 0

+/-10.0%

4" (101.6)

0.083" (2.11)

+/-0.015" (0.38)

+1/8" (3.18) - 0

+/-10.0%

6" (152.4)

0.083" (2.11)

+/-0.030" (0.76)

+1" (25.4) - 0

+/-10.0%

6" (152.4)

0.109" (2.77)

+/-0.030" (0.76)

+1" (25.4) - 0

+/-10.0%

8" (203.2)

0.109" (2.77)

+0.061" (1.55)/-0.031" (0.79)

+1" (25.4) - 0

+/-10.0%


Bright Annealed Tube ASME SA249 TP304

To ensure the highest surface quality in all of our sanitary tubing,Yuhong Special Steel goes beyond

the requirements of ASTM A269 and A270 by performing the full battery of ASTM bend and deformation

tests required by ASME SA249 as well as additional deformation tests developed by Yuhong Special

Steel The tests, combined with specific raw material requirements, Eddy Current testing at the tube mill,

and tighter OD and wall tolerances allow Yuhong Special Steel to provide a more consistent superior

quality product.Hydrogen bright annealed in line to 1900°F (1040°C) minimum and rapidly

quenched.Surface finish is 20 μ-in Ra (0.5 μm) ID maximum, 30 μ-in Ra (0.8 μm) OD maximum surface

roughness measured per ASME/ ANSI B46.1 with the profilometer reading at 90 degrees to major polishing

pattern.Yuhong Holding Group`s polishing techniques result in surface finishes that lead the industry. All

tubing is printed with size, gauge, alloy, ASTM and ASME specifications, heat number and date of

manufacturing for full traceability.As a final step in maintaining purity standards, Yuhong Special Steel`s

A270 S2 tubing is packaged using protective 2 mil poly sleeving along with air tight plastic end caps. The

tubing is then placed in triple wall boxes for maximum protection during shipment. Other packaging is

available on request.


Yuhong Group Plant

Yuhong Holding Group Co.,Limited is one of the largest Procurement Engineering and Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2008, ISO 14001-2004. Yuhong Holding Group has expanded its field of activities and entered in trade and supply of tubular & flat products in Stainless Steel, Carnon steel, Alloy Steel as well as a series of special materials for our reputed clients worldwide. These products are widely used in various important sectors like Mining, Energy, Petrochemical, Chemical Industry, Food Plant, Paper Plant, Gas and Fluid Industry etc.

"We keep on with our enterprise spirit of ""Quality, Performance, Innovation and Integrity"". We intention to create far more value for our buyers with our loaded resources, state-of-the-art machinery, experienced workers and great expert services for Stainless Steel Bright Annealed Tube ASTM A249 TP304. The product will supply to all over the world, such as: Saint Vincent and the Grenadines,Spain,South Korea. In order to make more people know our products and solutions and to enlarge our market we've devoted a lot of attention to technical innovations and improvement as well as replacement of equipment. Last but not the least we also pay more attention to training our managerial personnel technicians and workers in planned way.

Email To This Supplier

Your message must be between 20-8000 characters

YOU MAY LIKE
  • Quality assured factory supply stainless steel hydraulic cylinder tube

    Specifications stainless steel hydraulic cylinder tube 1 MANUFACTURE 2 High dimensional accuracy 3 Factory price fast delvery 4 OEM Product Description Technical Parameter stainless steel hydraulic cylinder

    Ask PriceClick for details

  • 304 / 304L / 316 / 316L Stainless Steel Bright Annealed Tube

    Product Description Name 304 304L 316 316L Stainless Steel Bright Annealed

    Ask PriceClick for details

  • Seamless Stainless steel bright annealed tube

    Specifications Seamless Stainless steel bright annealed tube 1 Material 304 316L etc 2 OD 15mm 900mm 3 Thickness 2 60mm

    Ask PriceClick for details

  • N304009-22mm High Quality Stainless Steel Tattoo Grip Tube

    Specifications High Quality Stainless Steel Tattoo Grip Tube 1 Stainless Steel Grip 2 With back stem 3 Length 50mm 4 Diameter 22mm New products

    Ask PriceClick for details

  • 304L Cold Drawn Stainless Steel Bright Round Bar

    Model NO 304L Cold Drawn Stainless Steel Bright Round Bar Standard ASTM AISI GB JIS DIN

    Ask PriceClick for details

  • 316L Cold Drawn Stainless Steel Bright Round Bar

    Model NO 316L Cold Drawn Stainless Steel Bright Round Bar Standard ASTM AISI GB JIS DIN

    Ask PriceClick for details