YUHONG GROUP CO.,LIMITED

Home > Recommended
Product Categories
Online Service

Europe style for High Pressure Seamless Tube ASTM A213 T91 High Pressure Heat Exchanger Tube supply to Guyana Exporter

  • Product Detail
  • Product Tags
  • Buyer Reviews

"Sincerity, Innovation, Rigorousness, and Efficiency" is definitely the persistent conception of our enterprise for the long-term to create together with buyers for mutual reciprocity and mutual advantage for ASTM A213 T91 Seamless Alloy Tube,ASTM A213 T91 High Pressure Seamless Tube,High Pressure Alloy Seamless Tube ASME SA213 T91. we have accumulated rich experience and advanced technologies in the generation of our solutions.

Europe style for High Pressure Seamless Tube ASTM A213 T91 High Pressure Heat Exchanger Tube supply to Guyana Exporter

ASTM A213 T91 High Pressure Heat Exchanger Tube


We are one of the leading Manufacturers, Supplier and Exporters of high quality ASTM A213 T91 Alloy Steel Seamless Tube. These tubes are widely used in various application industry such as Oil & Gas, Power, Fertilizers, Heat-Exchangers, Paper & Pulp, pharmaceuticals, Chemicals, Water Treatment, Dairy etc.


We are Offered at competitive prices in the market.

ASTM A213 T91 Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H.

These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T91 tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.


ASTM A213 T91 High Pressure Heat Exchanger Tube
ASTM A209 Through A213
  • Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes. Piping wall thicknesses range from 1/2 inch to 5 inches. A213 grades also have the letter H or M assigned, which changes the composition and specifications for that series.





This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.


Chemical Composition(%) for ASTM A213 T91 Low Alloy Steel
UNS Designation K31545
Carbon 0.05–0.15
Manganese 0.30–0.60
Phosphorus 0.025
Sulfur 0.025
Silicon 0.50–1.00
Nickel -
Chromium 2.65–3.35
Molybdenum 0.80–1.06
Vanadium -
Boron -
Niobium -
Nitrogen -
Aluminum -
Tungsten -
Other Elements -
Mechanical properties for ASTM A213 T91 Low Alloy Steel
Tensile strength(min) 415Mpa
Yield strength(min) 220Mpa
Elongation 30%
Delivery condition annealed
ASTM A213 Standard Scope

1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T91, TP304, etc. These steels are listed in Tables 1 and 2.
1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.
1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the [M" designation of this specification is specified in the order.
TABLE 1 Chemical Composition Limits, %A, for Low Alloy SteelA Maximum, unless range or minimum is indicated. Where ellipses (-) appear in this table, there is no requirement, and analysis for the element need not be determined or reported.

B It is permissible to order T2 and T12 with a sulfur content of 0.045 max. See 16.3.

C Alternatively, in lieu of this ratio minimum, the material shall have a minimum hardness of 275 HV in the hardened condition, defined as after austenitizing and cooling to room temperature but prior to tempering. Hardness testing shall be performed at mid-thickness of the product. Hardness test frequency shall be two samples of product per heat treatment lot and the hardness testing results shall be reported on the material test report.

Referenced Documents (purchase separately)

Other ASTM Standards
  • A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
  • A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
  • A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
  • E112 Test Methods for Determining Average Grain Size

We provide good power in high-quality and progress,merchandising,revenue and internet marketing and operation for ASTM A213 T91 High Pressure Heat Exchanger Tube. The product will supply to all over the world, such as: Jamaica,Guadeloupe,New Caledonia. With more than 9 years of experience and a professional team we have exported our products to many countries and regions all over the world. We welcome customers business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Email To This Supplier

Your message must be between 20-8000 characters

YOU MAY LIKE
  • DN40 astm a213 seamless alloy tube price

    astm a213 seamless alloy tube We specialized in manufacturing the carbon steel pipe What s the features of our products 1 Arts and crafts cold drawn or hot rolled 2 Surface Treatment Galvanzied or as customers request 3 Chemical and Physical characteristic durable corrosion resistant and high temperature resistant 4 We also produce pipes with special specifications according to customers

    Ask PriceClick for details

  • astm a213 t5 seamless alloy steel pipe

    Hongsheng Steel Pipe Co Ltd is the largest manufacturing and sales enterprise for galvanized steel pipe seamless steel pipe and fittings in the north of Shandong Province The Company registered capital of 3 6 million yuan covers an area of 280 acres has 570 staffs including 9 senior engineers and 42 engineers Qingdao Kwayt Co Ltd is the subsidiary company of Shandong Hongsheng Steel Pipe Co Ltd which is engaged in exportation of steel pipes and fittings Our company has three production lines of...

    Ask PriceClick for details

  • ASTM A213 T91 Seamless Steel Boiler Tubes

    Specifications 1 Material T91 2 Size 30 50mm 3 Wall Thickness 3 20mm 4 Technique cold drawn 1 Material of the

    Ask PriceClick for details

  • ASTM A213 T91 Seamless Steel Boiler Pipe

    Specifications 1 Material P91 2 Size 30 50mm 3 Wall Thickness 3 20mm 4 Technique cold drawn 1 Material of the pipe 2 Application Boilerand

    Ask PriceClick for details

  • ASTM A213 T12 Seamless Alloy Pipe

    Model NO KM 012 Technique Cold Drawn Surface Treatment

    Ask PriceClick for details

  • ASTM A213 T5 Seamless Alloy Pipe

    Model NO KM 015 Technique Cold Drawn Surface Treatment

    Ask PriceClick for details